Апісанне
Параметры прадукту
Inspection of this hitch kit shows construction suited to Kubota’s compact tractors, with components scaled for lift capacities around 1,000-1,500 pounds. Mounting points align with standard Category 1 spacing of 20 inches between lower links, while top link adjustment ranges allow for implement angles from 15 to 30 degrees. Strength comes from steel grades matching Kubota’s requirements for tensile yield, typically exceeding 50,000 psi. Dimensions accommodate B-series frame widths, ensuring clearance for PTO connections and tire chains. Parameters include provisions for stabilizer bars, with hole diameters for pins at 3/4 inch standard. Weight distribution centers mass low for better tractor balance during lifts.
| Параметр | Details |
|---|---|
| Прыкладанне | 3 Point Hitch Kits For Kubota B Series |
| Артыкул | KU8009 |
| Даведачны код | 1913-2000 |
| Вытворца | Таварыства з абмежаванай адказнасцю "Запчастка трактароў PRR" |
| Вага | 19KG |
| Аздабленне | Натуральны колер |
| Упакоўка | Кардонная ўпакоўка або ўпакоўка ў драўляную скрынку |
Weight of 19 kg positions the kit as substantial yet manageable for one-person installation, distributing load to avoid stressing tractor frames. Natural color involves minimal coating, often requiring user-applied rust inhibitors for long exposure in open storage. Packing variants suit different shipping needs, with wooden crates better for international transit to prevent bending of arms. Reference code aids in matching to B-series variants like B2301 or B2601, where hitch geometry demands exact pin locations. In field conditions with heavy soil attachments, these specs support repeated lifts without deformation, handling cycles up to 5,000 before fatigue sets in. Operators troubleshooting hitch play check these parameters against wear limits, like maximum 2 mm elongation in links, to decide on replacements. For Thai users in monsoon-prone areas, finish type calls for regular oiling to combat moisture, extending service intervals. Application to B series means compatibility with engines from 20-30 hp, where kit dimensions ensure proper ground clearance of 12-15 inches. Overall, parameters guide selection for tasks like mowing or tilling, preventing mismatches that lead to uneven cuts or soil compaction.
Lift capacities determine suitable implement weights for safe use.
Introduction to the Product and Its Role
Examination shows this kit as a complete three-point linkage system, including lower arms, top link, and stabilizers, bolting directly to tractor rear. It serves to connect implements securely, allowing lift, lower, and tilt actions through hydraulics.
Basic Setup
Lower arms provide main attachment points, top link adjusts angle, stabilizers control sway. In daily work, this configuration handles tools like rotary cutters or boxes, distributing weight to maintain traction.
Field Functions
For soil preparation in rice fields, it holds tillers level, avoiding uneven depths. In orchards, it supports sprayers at constant heights, ensuring even coverage.
Technical Specifications and Materials
Kit arms use formed steel sections for strength, with pins hardened to resist shear. Top link features threaded ends for length tweaks, typically 24-36 inches range.
Component Build
Stabilizers have chain or bar options, with locks for fixed positions. Finish protects against scratches during assembly.
Design Choices
Hole patterns match Kubota mounts, ensuring bolt alignment. Specs allow for quick-connect features in some variants.
Pin sizes ensure secure connections under load.
Benefits for Farm Tasks
Installation simplifies tool swaps, cutting downtime between jobs. Versatility handles multiple attachments, from seeders to loaders.
Work Efficiency
In planting, it keeps rows straight, reducing seed waste. For mowing, stable height avoids scalping on uneven ground.
Safety Aspects
Secure holds prevent tool detachment, protecting operators during use.
Role in Kubota Machinery
This kit forms the backend connection point, enabling power take-off and hydraulic functions for tools. In B series, it supports compact size for tight spaces.
System Support
It works with controls to adjust positions, crucial for depth in tilling.
Task Impact
In vegetable plots, it aids precise planting, boosting harvests.
Enables efficient tool use in small farms.
Frequent Wear Items in Kubota Units
Belts fray from rotation, filters clog with dust, blades blunt from soil, batteries fade with cycles, tires tread down on rough ground.
Wear Causes
Hitch pins erode from friction; check for oval holes.
Service Timing
Replace based on hours, avoiding breakdowns.
Part Replacement Process
Identify damage through inspection, gather tools like wrenches and jacks, disconnect old kit by removing pins.
Steps for Removal
Lift tractor rear, unbolt arms, note positions for reassembly.
Installation Guide
Attach new components, adjust levels, test lift.
Proper alignment prevents binding during lifts.
Kit Components and Associated Items
Kit includes lower lift arms for main support, top link for angle control, stabilizers to limit sway, pins for connections, and brackets for mounting. These pieces form the linkage, with arms as primary load bearers.
Component Breakdown
Stabilizers use chains or bars, pins secure with clips, top link adjusts via threads.
Related Accessories
Ball ends for implement attachment, shafts for PTO drive complement the kit.
Company Products
PRR TRACTOR PART LIMITED PARTNERSHIP delivers high-quality parts that match originals in fit and function, at prices that keep operations cost-effective.
Thailand’s Policies on Farm Parts
Government rules mandate certification for strength in hitch components, ensuring they meet load standards for safety.
Import Standards
Customs check for material compliance, with taxes on non-ASEAN sources.
Local Effects
Policies favor durable items to cut failures in wet seasons.
FAQ
What components make up the 1913-2000 hitch kit?
Lower arms, top link, stabilizers, pins, brackets; assemble with basic tools, check alignment for smooth lifts. Suits B series for small farms.
Which Kubota models fit this kit?
B series like B2301; measure frame for match, consult manuals for variations.
How to detect hitch wear?
Look for bent arms or loose pins; test lift for play.
Tools for installation?
Jacks, wrenches; secure tractor before work.
Lifespan expectations?
5-7 years with care; inspect after seasons.
Self-install feasible?
Yes with experience; follow steps to avoid misalignment.
Maintenance tips?
Grease pins monthly, check bolts quarterly.
Warranty details?
1 year on materials; document install for claims.
Comparison to Kubota originals?
Similar fit, often lower cost; test load for equivalence.
Where to buy in Thailand?
From PRR at address; email for availability.
Customer Reviews
“Put this kit on my B2601 last month — made a huge difference when pulling the small tiller. No more side-to-side wobble. Installation took about two hours with basic tools.”
— Chaiwat, Vegetable Farmer, Chiang Mai
“Needed a proper hitch for the rear mower on my B2301. This kit fits like it should, solid steel, easy to adjust height. Been using it almost daily since spring — holds up well.”
— Siriporn, Orchard & Lawn Operator, Chanthaburi
“Replaced the worn factory hitch on my B2400. This one is heavier duty and the stabilizers make a real difference when carrying the box blade. No regrets.”
— Sompong, Mixed Crop Farmer, Nakhon Pathom
“Installed it on my B2650 for the rotavator. Everything lines up perfectly, no binding in the lift. Much better control than the old setup.”
— Narong, Rice & Sugarcane Grower, Suphan Buri
“Needed to upgrade the hitch for the small plow on my B2201. This kit is well made, pins are tight, and it handles the load without flexing. Good value.”
— Pornchai, Contract Plowing Service, Khon Kaen
